General
Not available yet.
Comming soon: pallete tools, documentation, vertex scale, street along (based on ThomThom's StreetGen)

v10.0 - Displacer added;
v9.3 - Edge groups added;
v9.2 - Scaling improvement (less viewport clipping) and documentation;
v9.1 - UI improvements;
v9.0 - Base Modus UI implemented;
v8.2 - Added rotation&scale phase offset, 3 up reference modes + UI & code improvements;
v8.1 - Added more interpolation modes on Follow Rotate Scale and bug fixes;
v8.0 - Added Follow Rotate Scale, selection report, vray alarm, +SU links, dev shortcuts;
v7.2 - Added follow path feature for roller chain, SU Links, Selection report & bug fixes;
v7.1 - Added follow path feature for mariner chain;
v7.0 - Added color pallete, remove materials, disguise pattern, agroup by loose, multiple push pull, name change;
v6.3 - Forgot a piece of code used for debugging that prints a txt file on the desktop. Sorry, fixed now.
v6.2 - Bug fixes and 'bicycle wheel' feature is now stable;
v6.1.b - Bug fix where rails face wasn't generated on last section in loops;
v6.0.b - Added railway along path;
v5.0.b - Added bicycle wheel and tyre;
v4.0 - Added springs, suspension and code improvements;
v3.0 - Added spur gear and code improvements;
v2.0 - Added roller chain;
v1.0 - Mariner chain.
Hello, my name is Matheus (nick 'Tax'). I'm from Brazil.
I've been working on this extension since 06/2020.
It's been a fun project and really a lot to learn still.

I've studied Civil Engineering but now graphic design is my new profession.
Apart from SketchUp, witch I meet on version 8 by google, I've used several other tools such as Blender, Photoshop, Sony Vegas, Audition...

Being a freelancer is a crazy ride but also teachs you a lot about bussiness.
I'm hoping this extension helps most of SU users, while I'm improving it, and also helps me on world wide networking.

My portfolio: Link

Feel free to call me if you need:
Email: MR.producaodigital@gmail.com
Mechanicals
It needs selected a group/component and a set of edges as path.
It places an object instances along a path.

Parameters:
- Section interval:
- Rotation interpolation:
- Rotation parameter:
- Rotation Phase:
- Rotate cycles:
- Rot exp/log:
- Scale interpolation:
- Scale parameter:
- Scale Phase:
- Scale cycles:
- Scale exp/log:
- Reverse segments:
It needs selected a group with edges to serve as profile and a set of edges as path*.
[*] In case no path is selected, it will follow a straigth up line.

Parameters:
- Section interval:
- Up reference:
- Rotation interpolation:
- Rotation parameter:
- Rotation Phase:
- Rotate cycles:
- Rot exp/log:
- Scale interpolation:
- Scale parameter:
- Scale Phase:
- Scale cycles:
- Scale exp/log:
- Reverse segments:
- Invert diagonals:
It builds a railway along the selected edges set.
Parameters:
- Rails gauge:
- Timber length:
- Timber width:
- Timber thickness:
- Timber spacing:
- Up offset:
- Timber spacing:
- Reverse?:
- Timber bevel:
- Make reference?:
- Transition mode:
It place roller chain links along the selected path.
Parameters:
- Pitch:
- Roller diameter:
- Roller width:
- Roller thickness:
- Pin diameter:
- Plate thickness:
- Details (sides): Ammount of edges on circles and curves.
- Roller-out ratio:
- Rin-Rout ratio:
- Smooth?:
- Bevel factor:
- Copies in row:
- Construct reference?:
It place mariner chain links along the selected path.
Parameters:
- Nominal diameter:
- Inside length:
- Inside width:
- Chain type:
- Details (sides): Ammount of edges on circles and curves.
- Copies in row:
It builds a bicycle wheel from given parameters.
Parameters:
- General datail: Ammount of edges on circles and curves.
- Rim diameter:
- Hub hole diameter:
- Spokes:
- Spoke diameter:
- Hub width:
- Rim width:
- Hub thickness:
- Rim thickness:
- Tyre thickness:
- Rim height:
- Tyre height:
- Hub plate offset:
- Spoke - hub plate ratio:
- Rim plate offset:
- Make references:
It builds a suspension from given parameters.
Parameters:
- General detail: Ammount of edges on circles and curves for general.
- Spring revolution detail: Ammount of edges on circles and curves for revolutions.
- Spring tube detail: Ammount of edges on circles and curves for the tube.
- Suspension length:
- Suspension extension:
- Spring compression:
- Cilinder diamenter:
- Casing thickness:
- Casing screw laps:
- Plate thickness:
- Compressor thickness:
- Hole diameter:
- End elongation:
- Anchor thickness:
- Spring revolutions:
- Spring tube diameter:
- Make references:
It builds a linear spiral from given parameters.
Parameters:
- Radius 1 (base):
- Radius 2 (top):
- Height:
- Revolutions:
- Edges per revolution:
- Make tube?:
- Tube diameter:
- Tube detail (sides): Ammount of edges on circles and curves.
- Construction reference:
It builds a spheric spiral from given parameters.
Parameters:
- Sphere radius:
- Revolutions:
- Edges per revolution:
- Cutoff:
- Stretch factor:
- Make tube?:
- Tube diameter:
- Tube detail (sides): Ammount of edges on circles and curves.
- Construction reference:
It builds a spur gear from given parameters.
Parameters:
- Pitch:
- Teeths:
- Presure angle:
- Clearance:
- Width:
- Hole diameter:
- Details (sides): Ammount of edges on circles and curves.
- Construction reference:
Pallete
Description
HSV based harmonic color rules tool. Features 8 basic rules.

Shade Tone Tint: Fixed VAL.
Monochromatic: Fixed SAT.
Analogous: 30º HUE offset.
Complementary: 180º HUE offset.
Split Complementary: 150º and 60º HUE offset.
Triadic: 120º HUE offset.
Tetradic Square: 90º HUE offset.
Tetradic Rectangular: 150º and 30º HUE offset.
Utilities
Tools
Selection Report: When enabled, it prints an object counter on top of viewport.
Vray Alarm: It must be activated after v-ray has started rendering, it will beep once its finished.
Agroup by Loose: It agroups connected entities.
Multiple Push Pull: It extrudes faces using a random parameter.
Disguise Pattern: It modifies position, rotation and scale of selected objects using a random parameter.
Edge groups: It saves a set of edges selection on 5 available slots.