Adjust temperature: 0x0

Wearleveling gap threshold : 0x0064
Gap between LSB and MSB : 0x04
Reclaim UpCntr WL : 0x03
Reclaim DownCntr WL : 0x00
System PLL clock1 : 0x0022
System PLL clock2 : 0x0000
System PLL clock3 : 0x0000
PowerOnGcTimeLimitation : 0x08
Background Gc Time Limitaion : 0x05
Tlc Wearleveling Gap Count : 0x06
External copy PE threshold_Lo : 0xB8
External copy PE threshold_Hi : 0x0B
Customized Function : 0x00
-Disable VDT 23 toggle WP
Force Support SATA speed : 0x82
-Gen3
-SSC disable
General Setting : 0x4C
-Enable PMIC setting
-Quick Erase disable
-Write Protect disable
-Sata PHY setting enable
Vendor Setting : 0x00
Set PHY SSC Range : 0x00
Set PHY TX Pre-emphasis Value in Gen1 : 0x06
Set PHY TX Pre-emphasis Value in Gen2 : 0x06
Set PHY TX Pre-emphasis Value in Gen3 : 0x15
Set PHY TX Amplitude Value in Gen1 : 0x44
Set PHY TX Amplitude Value in Gen2 : 0x44
Set PHY TX Amplitude Value in Gen3 : 0x60
Set PHY RX Equalizer Value : 0x01
Set DC2DC 1.2v : 0x60
Set PMIC Buck 1 (3.3v) : 0x24
Set PMIC Buck 2 (1.8v) : 0x0E
Set PMIC Buck 3 (1.2v) : 0x64
Download Microcode Capabilities : 0x07
-0Eh/0Fh is supported
-07h is supported
-03h is supported
Over temp Level 2 : 0x56
Under temp Level 1 : 0x52
Over temp Level 3 : 0x5B
Under temp Level 2 : 0x57
SporRiskyPageNum : 0x00
Data threshold : 0x00
Sorting ISP retry times : 0x00
-Retry times: 0x0
-Spec retry times
Retry enable / disable : 0x00
-Disable
DataEccTHLevel(24bit) : 0x20
DataEccTHLeve2(25bit) : 0x20
DataEccTHLeve3(40bit) : 0x1C
DataEccTHLeve4(42bit) : 0x1D
DataEccTHLeve5(48bit) : 0x21
DataEccTHLeve6(60bit) : 0x2A
DataEccTHLeve7(66bit) : 0x2E
SprEccTHLevel0(24bit) : 0x16
DataEccTHLevel1(20bit) : 0x12
QSI MPInfo : 0x01
-MPInfo
